no license server found

[dhurba]

Hi i have connected 4 servers(1 is the master  where the license is installed)  using procedure given in the Parallel Guide tutorial.we have used mpich2.

now when we use the command mpdtrace , it gives "command not found" .

Also the command lmxendutil -licstat shows that there is no license server available..

[Anders Blom]

You will need to troubleshoot the license server first. Is it really running? Is it properly configured? Try running lmxendutil -licstat on the license server itself to see this, and also check the license server log files for hints that something might be wrong.

Next you must have UPD and TCP/IP ports 6200 open on the license server and your machine, in order to see the license across the network. This also assumes the machines are both on the same network segment, otherwise you need to manually specify the IP number of the license server via the environment variable QUANTUM_LICENSE_PATH, as described in the installation guide.

[dhurba]

Please see the screen shot of lmxendutil on the server itself and lmx-serv on the server

[dhurba]

The screen shot at the slaves

[kstokbro]

The slaves does not seem to have connection with the license server. What is the IP of the license server?
Try to see if you can ping the license server from the slaves.
ping IP
Somehow there must be a problem with the internet connection between the slaves and the license server

[dhurba]

the IP of the license server is 10.0.0.1

slaves are 10.0.0.2, 10.0.0.4, 10.0.0.5

ping 10.0.0.1 gives reply from all the 3 slaves

[Nordland]

Is the correct port open?

If yes, try to disable auto discovery and enter the ip-address manually as described in the manual.

[Anders Blom]

That is, run

Code

export QUANTUM_LICENSE_PATH=6200@10.0.0.1
lmxendutil -licstat

[dhurba]

Thanks it worked.. but next when i run the test script given in parallel guide

Code

mpiexec -n 4 /opt/QuantumWise/atk-12.2.0/atkpython/bin/atkpython /home/user/test_mpi.py > /home/user/test_mpi.log

it returns as

Code

 ssh:vlsi1: Temporary failure in name resolution [code] 

[/code]

[dhurba]

When we use the command

Code

 mpiexec -n 4 /opt/QuantumWise/atk-12.2.0/atkpython/bin/atkpython /home/user/my_script.py > /home/user/my_script.log [code]

to submit a job (my_script.py) the simulation hangs after some time indicating that the slaves are not working.what might be the cause ?[/code]

[Anders Blom]

It's very difficult to say, it seems like some network problem. The error message is not printed by ATK, but by ssh showing that it is having problems connecting to the slave nodes. Check that mpd and is properly set up, and make sure the "test_mpi.py" script finishes properly before moving on to running more complex scripts.

[dhurba]

When i changed the host name to the IP ( for example 10.0.0.4) the message stopped coming ..

now mpiexec run on 10.0.0.4 gives the following log file

[Nordland]

When i changed the host name to the IP ( for example 10.0.0.4) the message stopped coming ..

now mpiexec run on 10.0.0.4 gives the following log file

I think you setup your machine file, such that it sends the job to other machines instead of 4 processes on the same machine.

[dhurba]

It's very difficult to say, it seems like some network problem. The error message is not printed by ATK, but by ssh showing that it is having problems connecting to the slave nodes. Check that mpd and is properly set up, and make sure the "test_mpi.py" script finishes properly before moving on to running more complex scripts.

Yes when i type 'mpdtrace' or 'mpdboot' it gives as "command not found"

Doesnt MPD installs automatically with mpich2.

the installation procedure we got does not have any mention about mpd

it shows only to install mpich2

by unzipping in the usr folder

./configure

make

make install

and editing bash

[Anders Blom]

No, mpd is not installed with MPICH2 anymore, as I recall. The default process manager is now hydra, which doesn't need the mpd* commands.

However, your parallel environment seems ok, however all MPI process run on the same node since you have not told it on which machines you want to run. For that you need a machinefile (see the MPICH2 documentation about that).